We are trying to install the GPS in the car correctly on our own. Modern gadgets from Navitel: mastering the configuration process Information update frequency

GPS navigators were once exclusively military equipment. Today they are used by many drivers of cars and other vehicles. There are many models, each of which has its own characteristics. How to make the right choice?

How does a car navigator work?

The principle of operation of navigators is simple: they determine the location by means of communication with the satellite. Many models also analyze the route through Internet access. The error is usually no more than 10 m. Modern options are able to lay routes to the destination and change them in real time when deviating from the path. It is possible to register movement parameters: speed (current and average), driving time. Modern navigators are full-fledged media devices. They can be used to play audio and video files, run games, and more.

Classic navigator: green arrow - car, blue marked route. On the left you can see the distance to the turn, travel time, speed and current time

Navigation software for cars

The technique is controlled by software. In our country, the most common options are I-Go, Navitel and Garmin:

• I-Go. Works on equipment that is controlled by the Windows CE operating system. Often installed on Asus, GoClever, Tenex, Ergo, EasyGo, MIO, LG and some other brands. The cards of this manufacturer are distinguished by a high degree of sophistication. Navigators with I-Go are recommended for use by drivers of commercial vehicles who often travel outside the territory of the Russian Federation.

I-Go navigator interface: minimalistic, simple and clear

• "Navitel". The best option for those who mainly travel through the territory of the CIS countries. "Navitel" is famous for the most detailed maps of Russia, Ukraine and the Republic of Belarus. It is used in the equipment of the same brands as I-Go, since it also works under Windows CE.

This is how your path looks in the navigator with the Navitel software. Places of accidents are marked with special icons

• Garmin. US made specific product. Works under Linux OS and only in navigators from Garmin - one of the world's largest manufacturers of such equipment. The main advantages are reliability and ease of control. Navigation is convenient, but the cost can be quite high. Garmin is the best choice for those who carry out international transportation. Most models of this brand cannot play music and video - this is a highly specialized technique for professionals, with powerful processors and fast receivers.

Garmin is a tool for those who want to always find the right path. The high price justifies itself

Cars and trucks

When choosing a navigator for a passenger car, it all depends on your preferences. Trucks are a little more difficult. Pay attention to navigators with additional features for commercial vehicles. For example, they can specify the weight and dimensions of the vehicle - this will be taken into account when plotting the route. Vehicles will guide you along the most suitable roads, avoiding low bridges.

Reviews of popular models

Garmin Dakota 20. Advantages: compact, lightweight, easily fixed in the hand and durable, does not break, user-friendly interface and display, holds charge perfectly, catches satellites instantly and does not lose them!! the ability to download maps and update them, you can buy an additional memory card, ideal for mushroom pickers, hunters, fishermen and cyclists, suitable for a car, high accuracy of the route and location, the ability to use as a flash drive, raster maps, compact. Cons: high price

Tatyana Kulikova

http://torg.mail.ru/gps/garmin-dakota-20-id260058/

iBOX Pro-7900 HD. The navigator is easy to use. But it’s not entirely clear that an update was downloaded on the Navitel website ... as a result, after installing the updater, the program sees the navigator, but does not offer any actions other than “buy”. Advantages: The navigator itself is excellent, there are no complaints about the work, but here is the technical support below .... Disadvantages: Very terrible site "navitel", in the instructions for installing updates one thing, in reality everything is different. It's not clear now whether to update (is) or how. For example, in my city, roads have recently been CARDINALLY rebuilt in new places in the center, the navigator does not see the restructuring, it writes that I am on the lawn right by the eternal flame.

Nikolay Smirnov

http://torg.mail.ru/gps/ibox-pro-7900-hd-id14219887/

Garmin nuvi 50. I have a nuvi 2597 model, bought in Europe with a map of Europe. I traveled around Europe in the spring, it was just super, it started and led me out of the most confusing streets of Prague and Paris. But then I came home and decided to download a map of Russia and specifically Moscow and M.O. In the store at the officials, in the T.Ts. Gagarinsky for almost two thousand inserted an SD card with a map of Russia program. I have been traveling for two months in Moscow and the region and I am horrified. Firstly, the menu does not contain many settings from those that were in the European menu (such as entering an address index), and secondly, it is impossible to enter elementary settlements such as Krekshino or Molokovo and ..., they are not by default in the keyboard layout. And the worst thing is that at least a year old maps have been uploaded, for example, he warns me about the left arrow, and there has been a year since there is no traffic light at all (for example, when leaving Admiral Kornilov on the Kaluga highway) and there are a lot of such jambs. I really regret that I didn’t add a little more and didn’t take some simple Navitel, in which a detailed modern map is loaded and which can be updated, unlike naturally, from an SD card. I just wanted to use Garmin, because I paid a lot of money for it with the Eurocard and the Russian menu. Conclusion, I do not advise you to take additional in Garmin. options and maps on SD, everything is uploaded there wretchedly and poorly, thrown out money.

Manelyuk Oleg

https://market.yandex.by/product-garmin-nuvi-50/7764831/reviews?canonical=garmin-nuvi-50&productId=7764831&lr=0&rtr=157

Screen

• Screen size (diagonal) is measured in inches. The wider, the more information can be seen. In modern navigators, the screen size is from 3.5 to 7 inches. The best option for a passenger car - about 5 ". It will not take up much space and will give you the opportunity to see everything you need.
• The display sensor is either resistive or capacitive. The resistive one is more accurate, but if the device is equipped with a large screen, the lack of accuracy of the capacitive version ceases to matter.
• Resolution is the number of pixels per unit area. The quality of the picture on the screen depends on this parameter. Resolution is expressed in letters or numbers (VGA, 640×480). The choice depends on the screen size. For a small fixture (up to 5-6 inches), 480x282 is enough. For large (6-7) - 800x480.
• Viewing angle. A wide viewing angle makes it possible to see the image on the screen from the side, without loss of contrast. In most modern models, the indicator is 140 degrees. In general, the more the better.

Specifications

CPU

The most important characteristic is the clock frequency. The higher it is, the faster the main functions are loaded and the routes are calculated. Most drivers will be satisfied with a frequency of 500 MHz, but in commercial vehicles you can use more powerful models - from 700 MHz.

RAM

Directly affects the speed of task execution. The minimum allowable option is 128 MB, but it is better to take from 256 MB. In this case, you do not have to spend a lot of time switching between applications and working in three-dimensional mode.

Built-in storage

Many modern navigators use a solid-state drive (SSD). The larger its capacity, the better. The device plays the role of a computer hard drive - it stores maps, your files and much more. In the best options, the capacity reaches 64 GB, but in most cases much less is enough - about 4 GB.

Support for memory cards is possible. CompactFlash is the cheapest and "slowest" option. SD cards are much faster and more reliable. MicroSD is the same as SD, but smaller in size.

GPS module

Responsible for receiving signals from the satellite. Consists of an antenna and a chipset. In most navigators, the antenna is built-in, but there are also remote ones. A chipset is a set of chips that processes the signal. The best options are made by Mediatek and SiRF. A good chipset will make it possible to obtain accurate coordinates in densely built environments.

Number of channels

The more channels, the more accurate the location will be. The minimum option for today is 32. It is recommended to pay attention to equipment with 64–66 channels. This will make it possible to receive not only direct, but also reflected signals, avoiding interference.

Information update frequency

The more often the navigator processes information received from the satellite, the more accurate the determination of the coordinates will be. But this also has a negative side - a high rate quickly drains the battery. A large frequency is needed for drivers who constantly move around large cities with heavy traffic.

Availability of GSM/GPRS module

The navigator can also be used to access the Internet. This is necessary not only for entertainment, but also for expanding functionality - for example, downloading new maps or more accurate orientation in the area. However, to connect, you will need to insert a SIM card into the equipment.

Navigator installation

Where to put

Standard portable models are equipped with a standard suction cup mount. They are designed to be mounted on glass. You can fix the device in almost any part of the glass, but make sure that it does not block the view. Remember - the metallized film on the glass can shield the antenna (especially the built-in one), which will reduce the accuracy of the signal.

The most common way to mount the navigator is on the glass, to the right of the steering wheel.

Use of additional systems of fastening is possible. With their help, the equipment is generally attached to any place in the cabin - on the panel, body, roof ... If necessary, the device can be quickly removed. There are pocket navigators. They are fixed in a phone mount or cup holder. It is not very convenient to use such a model - it is desirable that a passenger sits next to him, who would suggest the route.

How to connect

If you intend to use a modern large-screen navigator, the connection process will be somewhat more complicated.

You will need a screwdriver and a wire with a 2A fuse (you can solder it yourself). You may need an RCA-to-mini-jack adapter.

Don't worry, some of these wires can be dispensed with. Usually only food is enough

1. In most modern cars, the place for the navigator is located above the radio or below it. Remove all parts to be replaced from the panel.
2. Connect the video inputs that will be used to connect to the radio, rear view camera and other devices.
3. When adjusting the gyroscope, set it to a position perpendicular to the ground.
4. Attach a USB extension cable - this will make it possible to connect external media to the equipment.
5. Connect the navigator to the cigarette lighter through a wire with a fuse. Thanks to this, the device will receive electricity without occupying the socket.
6. Fasten the appliance to the panel using frame fasteners. It is best to use double sided tape. Some models come with special fasteners - it greatly simplifies the task.

Video: connecting a GPS navigator

How to make a car holder with your own hands

1. The cheapest option is to buy double-sided tape or sewing tape. Clean the dashboard and back cover of the navigator from dust and dirt, then attach the device to the panel with tape or tape. The method is only suitable for careful drivers, since the material may not withstand strong shaking.
2. A more reliable option is to use a clerical clip (“binder clip”). Remove the brackets from it and bend the side elements to fit your navigator. Wrap them with a thick thread so that they do not unbend. The device can be placed in the air duct. It will firmly fix the technique. The disadvantage is that it is not always easy to get the navigator out of such a holder.
3. If you are not afraid to drill a dashboard, you can hang the navigator on it with a wire (only for navigators in a case with a holder!). Drill two holes for the diameter of the wire. Bend the wire and insert into the holes. Attach a gadget case to it.

Setup and update

In most cases, to configure and update, you need to connect the navigator to a computer or laptop. You will need proprietary software from the manufacturer (Navitel has Navitel Navigator Updater) - the instructions usually tell you where to download it.

1. Connect your gadget to your computer via a USB port. The PC must have Internet access!
2. Select the Mass Storage mode in the Navigator settings menu.
3. Run the update program.

The remaining steps take place automatically - you only need to click "Next" and "Finish".

Some modern navigators can be updated via Wi-Fi or mobile Internet. The process does not require any intervention on your part. However, it is better to select “Ask for permission to update” in the settings, otherwise the technique may use up all your traffic.

Add a comment

If you have never used a car navigator, then you may think that, like any other device, it requires some special skills, just like It is not. Installing and setting up the autonavigator is very simple, and the instruction is always supplied with the device, if not in paper, then in electronic form.

How to install a car GPS navigator (autonavigator)

In the box with the navigator there is always a bracket and a stand. The stand is a frame where the body of the navigator is inserted to fix it on the bracket. The bracket is needed to firmly mount the navigator on the windshield or front panel of the car. There are other places to place navigators, but these are the most common. The main thing is not to install the navigator in places where it will block the driver's view and interfere with driving. Also, do not mount the product where the airbags are located.

The navigator is not always sold with a fully charged battery, so before you start using it, you need to charge the battery. Depending on the model, you can charge the navigator either through the computer's USB port or from the 220V network through the appropriate charger, but most often charging occurs through a car charger, which is included with any navigator. Other charging methods may not be as effective.

Connecting the car GPS-navigator to the car's on-board network is done only after the car has already been started, otherwise the device may be damaged.

How to set up a car GPS navigator (autonavigator)

Most often, difficulties with the navigator arise when laying a route. In most cases, this is due to the fact that users do not study the instructions for setting up the navigation program, because route planning can occur according to various algorithms (bypassing traffic jams, along main roads, in the best way, the fastest, etc.). And how to use the navigator without understanding the instructions?

So, for example, in the program "Navitel Navigator" you can set the method of laying a route by time (fast path) or by distance (short path). At the same time, a short path will not necessarily be fast, as it might seem. You can also set options such as avoiding toll and dirt roads and minimizing U-turns. Therefore, in order not to be surprised at how your navigator paved the way to the specified point, first study the instructions and set the navigator to the appropriate way to build a route.

Instructions for setting up Navitel

By the way, Garmin navigators tend to avoid left turns when building a route. This is a feature of this brand. Therefore, if you do not like left turns, then you should take a closer look at one of the Garmin navigators when buying.

Another complaint from users is that the navigator warns late about the upcoming maneuver. It is also a configurable setting of the navigation program. For example, in the Navitel Navigator program, the time interval for which you need to warn about a maneuver is set in the navigation program settings menu, but in the City Guide program, a warning is given 500 meters before the turn. This can be a decisive argument when choosing a navigator.

Today, almost every device is able to replace the navigator. We are not talking about expensive models, where there are many different functions. Even the most budget smartphone is equipped with GPS. Enabling this feature is quite simple, probably even a novice user can handle it. But, as practice shows, even with such a seemingly elementary action, problems can arise. Let's look at how to enable GPS on Android?

Enable GPS

To turn on navigation, you need to go to the menu and open the settings. In a new window, you need to find the "location" section and open it. How to enable GPS on Android? To do this, press the switch. Of course, it will be different in different versions, but you will have to choose the mode of operation. What are they?

How to enable GPS on "Android 5.1"? In the new version, you can find the button to enable navigation in the "shutter". To enter the GPS settings, you need to press this button and hold it for a while. How to enable GPS on "Android 4.4" and earlier? To do this, follow the instructions above.

Additional components

So, we looked at how to enable GPS on Android. This is not the only problem that many users face. Another story is the navigation setup. Of course, this is a little more complicated, but if you follow the suggested recommendations, you can set up your GPS in a matter of minutes.

Before setting up, you need to install various applications on your device. This does not mean that you need to install a bunch of different navigators, one is enough, but a good one. You can install a compass for better navigation. Remember that you only need to download apps that are suitable for your version of the Android OS. The new device will only have the Google Maps app, but unfortunately you'll need an internet connection to use it. Because of this, many users are not satisfied with it, they are looking for an alternative. The most popular are Naviter (unfortunately, it is a paid, but quite convenient and high-quality application) and Yandex Maps (a free utility).

GPS Setting

If you have gone to the GPS setup, then you have noticed problems. Though you may not have done it yet. To check the navigation on your device, you need to run it, we have considered how to enable GPS on Android. We launch the navigator and make a route. If this could not be done or the program incorrectly showed your location, then you should go to the settings.

Conclusion

That's all. Now you know how to enable GPS on Android and set it up. There is nothing complicated in this, the main thing is to be guided by the rules.

This article is about how to set up traffic downloads on your navigator by connecting it to your phone via bluetooth.

To start, here are some definitions:

Bluetooth is a manufacturing specification for wireless personal area networks. Bluetooth allows the exchange of information between different devices on a radio frequency for short-range communication. Bluetooth allows these devices to communicate when they are within a few meters of each other.

DUN (Dial-up Networking Profile) is a protocol that provides standard access to the Internet or other telephone service via Bluetooth

GPRS (eng. General Packet Radio Service - general packet radio communication) is an add-on over GSM mobile communication technology that performs packet data transmission. GPRS allows the user of a cellular network to exchange data with other devices in the GSM network and with external networks, including the Internet.

Consider our question on the Garmin Nuvi 1410T GPS navigator model

Step-by-step setting of traffic jams in the navigator

Do the following:

1. Make sure that both the phone and the navigator have a full-fledged bluetooth module. Whether this module is available in your phone or navigator model can be found in the instructions for them. Usually on devices that support Bluetooth, you can find the corresponding icon. Our navigator supports Bluetooth technology
2. Make sure your phone also has a GPRS module and the corresponding function is enabled. This means that your phone can communicate with the Internet. Most modern phones have the ability to access the Internet.
3. Turn on Bluetooth on your mobile phone and turn on Bluetooth on your navigation device. This is done through the menu Bluetooth->Settings->Enable
4. Connect your phone to the navigator. To do this, in the Bluetooth navigator menu->Settings->Find phone, click on the magnifying glass icon. A search message will appear. After the search is completed, all found bluetooth devices will be displayed in the device list.
5. Select your phone in the list of devices and click on the icon for connecting to the navigator. A password entry window will appear (default 1234). Click "OK", the process of connecting the navigator and phone will start, after which your phone will ask you to connect to the navigator. Enter the same password and the connection will be established. Excellent! The bluetooth connection to the mobile phone has been achieved.
6. Internet connection. To do this, select the “Browser” item in the menu of your navigator and establish an Internet connection by pressing the button with the letter “G”, the message “DUN is connecting ...” will appear, when the connection is established, the message will change to “DUN is connected ". Excellent! Internet connection established.
7. Start navigation. If the "Traffic" option is enabled, then the navigator will start downloading traffic jams from the Internet immediately, if not, then enable the "Traffic" option and click "Update Now". If you did everything right, then on the map you will see highways painted in red, green and yellow. Excellent! Traffic information loaded. Have a nice trip.

In the car, it is a very useful and important device that will come to the aid of both a young car enthusiast and even an experienced driver. It is worth noting that many modern models allow not only choosing the most convenient and shortest route, but also avoiding traffic jams and choosing the best and safest travel route.

Connecting the navigator is not at all difficult. For this process, you do not need to have specific knowledge and skills. Of course, there is a nuance in the installation of a navigation device. Installation depends on the price category and complexity of the device.

How to connect a GPS navigator correctly?

So let's focus on price. Most of the modern navigators that are sold in the automotive markets can be divided into approximately 3 categories. The first includes those models whose price is below $ 200. They are the easiest to handle. They are equipped with a minimum of functions. These models rarely come with software. And if it is, then everyone can figure it out. Connecting a navigator of this price category will take just 15 minutes.

The second category includes navigation devices, the cost of which ranges from 200-500 dollars. GPS navigators of this category are much more common than others. Most motorists are inclined towards such models. Such devices have rich functionality, detailed maps of the area. Of course, a connection diagram is also attached to such devices.

The third category today includes those car navigators whose price is above $500. These devices are premium. They just have a lot of possibilities. It is the installation of such models that raises a large number of questions.

Connecting a GPS navigator with your own hands will take just a few minutes. Models of the second category work only in tandem with a PDA or laptop. The device connects to them using WIFI, Bluetooth or a USB cable. After the connection is made, it is necessary to download special software that is included with the navigation device. After that, the navigator will be able to catch signals and you can safely work with it.

It is worth noting that navigators that belong to the second category are usually equipped with an external antenna. Naturally, immediately after turning on the device should receive a satellite signal. If this does not happen, then you need to turn off the device and turn it on again. Such GPS navigators also need to be connected to a computer using a USB cable or Bluetooth. Make sure that the antenna is not covered by other objects.

As for the models of the third category, they have complex software. The driver should carefully study it and connect exactly the functions that he needs. To do this, you need to clearly follow the instructions that come with the device, which will help you properly connect the navigator to the car.