How to enable touch screen on hp monoblock. How to enable touch screen on Asus laptop

Some HP notebooks are equipped with a touch screen for computer control and text entry using a finger or a stylus (light pen). After the computer has adapted to your handwriting, you can enter information without using a keyboard and mouse. You may be familiar with a similar input device used in retail outlets to register a customer's signature when making purchases.

Handwriting recognition and touch screen control functions are only available on tablet notebooks with a dedicated LCD touch panel. For ease of use, the lid of HP Tablet Notebooks can be opened and rotated above the keyboard. The screen image can be rotated to any angle for easy viewing. Using the stylus (light pen), you can open programs and enter commands by touching the corresponding items on the touch screen. The handwriting recognition function will allow you to "write" on the screen, rather than typing characters using a conventional keyboard.

Before you can use these features, you must set up your computer to recognize user actions. All recognition functions are associated with a specific username and password for logging into the system. If multiple people use the same tablet notebook, each user must provide their own username and password and complete the following computer setup procedures.

Calibrate screen

Adapt handwriting recognition to your handwriting

Input Panel Selection

For convenience, you should run an interactive program to adapt the system to your handwriting - Tablet PC Pen Training. To call this program, click or tap the following items in sequence: Start > All Programs > Table PC > Tablet PC Pen Training.

Selecting the desired screen orientation

The LCD screen cover can be rotated in several directions. By default, the screen image is set to panoramic view. This is the same orientation relative to the keyboard in desktop computers. After turning the lid relative to the keyboard, if you want to work with your PC as a tablet, you need to set the screen image to vertical orientation.

To rotate the image, press the rotate screen image button located at the edge of the screen.

Touch screen calibration

Buttons and command entry fields are located at separate points on the screen. In order for the touch screen interface to respond to user actions, it is necessary to accurately determine the points of contact with a finger or a light pen in the coordinates of the image on the screen. The coordination of the eyes and hands of each person has its own individual characteristics. Touch screen calibration allows you to compensate for the difference between expected and actual touch on the surface.

To calibrate the touch screen, select the desired tablet screen orientation and follow the steps below.

Start > Control Panel > Tablet PC Settings

On the General tab, select whether the menu is displayed for right-handers (Right-handed ) or for left-handers ( Left-handed ).

On the General tab, select the required screen orientation from the drop-down menu, then click or tap Calibration .

Follow the instructions in the calibration program and touch the indicated points on the touch screen.

Repeat the calibration procedure for all four screen orientations, then click or tap Apply .

Later, you can configure the touch screen to control programs, as well as more convenient and accurate text entry in sections Pen and input devices and Input Panel Options.

Activating the function of recognition of personal features of handwriting

The handwriting recognition feature can be turned on or off. When calibrating the touch screen, you must do one of the following to enable this feature.

Click or tap the following items in sequence - Start > Control Panel > Tablet PC Settings to open the Tablet PC Setup dialog box.

On the Handwriting Recognition tab, check the box Use personal handwriting recognition settings.

Click or tap the OK button to use your personal handwriting recognition settings.

Enter handwriting samples to adapt the feature to your handwriting

To adapt the program to recognize your handwriting, use the stylus to follow these steps.

Using the stylus, touch the items Start > All Programs.

Place the stylus on the vertical scroll bar and move the bar down to view the entire list.

Tap Tablet PC , then Handwriting Personality to open the Handwriting Personality window.

There is a very useful thing in the Windows operating system. It's called "Device Manager" device manager.

How to enter the device manager?

To find Device Manager in Windows, right-click on the " My computer"and select the item" Control".

Further in the side column of the window " Computer management"looking for item" Device Manager" and click on it. In the central area of ​​the window we will see what equipment the computer consists of. We can say that this is the anatomy of a particular computer.

Here you can see which hard drive is installed and how many of them are in the system, which central processor is used, the model of the video card is indicated, the presence of network adapters (network cards) and much more.

Alternative way to open Device Manager: Button " Start", Further " Control Panel", then select " system and safety", after in the window we are looking for a section" System". It contains a link to " Device Manager"She looks like this.

How can a device manager be useful?

For laptops, one of the main problems is energy saving, since in standalone mode, power is provided by the battery. To reduce power consumption, you can use various software utilities, which are usually installed on any laptops and desktop PCs.

But there is another way. You can turn off unused or rarely used devices. You can disable, for example, the built-in video camera, wired or wireless network card, host controllers of unused interfaces (for example, the IEEE 1394 host controller). All of these devices are real electronic devices that consume battery power even when they are not in use and they are in " sleep mode».

Another example.

Many modern monoblocks are equipped with a touch screen. When using the Windows 7 operating system, the presence of touch control is not always convenient, and sometimes undesirable. Some touch screens are very sensitive and even react to insects (flies, midges, spiders, etc.). So, for example, I had to turn off the touch screen on the Sony Vaio VPCL14S1R all-in-one, as accidental insect triggers created inconvenience. You can rummage through the settings, but the easiest way is to disable the device that is responsible for touch input. In a specific case, the touch panel was registered in the dispatcher as NextWindow 1950 Touch Screen In chapter " HID (Human Interface Devices) devices".

How to disable a device in device manager?

You must select the device you want to disable. For example, I want to disable the wired NIC because I only use wireless. Finding the item Network adapters", click on the arrow to open the tab and show all devices belonging to this category. As you can see, I have two network cards in my computer:

Wireless– Atheros AR9285 Wireless Network Adapter, and

Wired- Intel (R) 82567V-2 Gigabit Network Connection (We will turn it off).

Right-click on the device name and click " Disable".

In this case, a message will appear that the device will not work in the disabled state.

Note that the main devices (hard disk, processor) cannot be turned off - point " Disable" is just not in the dropdown menu. Yes, this is not surprising.

After turning off the device, an arrow in a circle will appear on its icon, which indicates that the device is not working now.

The question is, how then to turn on the previously disabled device? Will we ever need it? Everything is done in the same way, but the item " Engage". After that, the device will turn on again, and will work in the same way as before it was turned off. In some cases, you may have to restart the computer in order for the programs to work correctly.

If you are still a novice computer user, then without special need do not turn off devices in the manager, otherwise you may encounter the fact that some programs will refuse to work. In any case, there is nothing wrong with this, since a device that was previously turned off can be turned on again. Therefore, if there are difficulties, you should not panic. You just need to find the disabled device in the device manager and enable it.

How else can the Windows 7 Device Manager be useful?

You may need Device Manager when upgrading your computer hardware (upgrade). In Device Manager, you can see which driver is used to manage the hard drive. So, for example, in the tab "IDE ATA/ATAPI controllers"we see that the controller driver is used to manage the hard disk Intel(R) ICH10 Family 4 port Serial ATA Storage Controller 1 - 3A20. Your controller may have a different driver. We also see that other adapters and controllers for interacting with SD and Memory Stick memory cards are registered in the same tab.

Also using " Device Manager" you can update the drivers of specific devices, as well as view the parameters and properties of the equipment through the item " Properties".

From time to time, laptop users think about how to disable the touch screen on a laptop. This term usually refers to touchpads - touch-sensitive panels on devices that replace the work of a computer mouse. Only in some laptop models, the touch screen is really a display that responds to "manual" commands. Therefore, we will briefly review their disabling. Let's focus on disabling the touchpads of laptops.

Methods for solving the problem

How to disable the touch screen on a laptop?

The user can:

• deactivate the touchpad through the "hot" keys;
• to disable the control through the OS settings;
• use additional software and drivers to implement the task.

What is better to choose? There can be no single answer to this question. For example, not all laptops have touchpad control buttons. And therefore the first option in the current situation will not work, no matter how convenient it is considered.

Lenovo and keyboard

How to disable touch screen on Lenovo laptop? The devices of this company usually have "hot" keys.

Most often, users are offered such combinations of buttons:

• Fn+F5;
• Fn+F6;
• Fn+F8.

Important: if you need to disable the touch screen on Lenovo, and not the touchpad, you can use the combination Fn + F9 or F9.

By the way, the combination Fn + F5 works on most laptops. For example, on Samsung or Toshiba.

Asus and Acer

How to disable the touch screen on a laptop? You can refuse to use the touchpad on Acer and Asus without any problems using the keyboard.

If we are talking about Acer, you should press Fn, and then, while holding the button down, click on F7. The touch panel will be activated in the same way.

How to disable touch screen on Asus laptop? The combination Fn + F9 usually works flawlessly. Just look at the labels on the buttons. If one of them has a picture with a crossed-out touchpad, you can use this key.

HP laptops

Unfortunately, HP laptops do not have separate buttons that are responsible for disabling touch control, but the user can try to cope with the task like this:

1. Double tap on the top left corner of the touchpad.
2. Hold down the left corner of the touchpad for about 5 seconds.

Most likely, one of these tricks will work. If not, you will have to use the built-in capabilities of the OS.

Windows 10

How to disable the touch screen on a laptop if the user is running Windows 10? This guide will help:

1. Open the "Options" menu item.
2. Go to "Devices" and click on "Touchpad".
3. Move the toggle switch to the "off" state.

That's all.

Additional software to help

Some laptops have Synaptics touchpads. This can play into the hands of the user. Synaptics has a number of separate drivers and a specialized application for adjusting sensor settings.

To disable the touchpad, you need:

1. Go to "Control Panel" - "Mouse". To do this, in the settings for displaying information, the parameter "Small icons" must be set.
2. Look in the "Options ..." section, next to which the Synaptics icon is drawn.
3. Select the touchpad and click the "Disable" button.

Important: in this window, users will be able to configure the sensor operation. For example, the ability to turn off the panel using separate keys or after connecting a USB mouse.

Mobility Center

How to disable the touch screen on a laptop? The next step is not for everyone. For some laptops, touchpad and touch screen settings are displayed in the Windows Mobility Center.

1. Right-click on the battery thumbnail in the system tray.
2. Select "Windows Mobility Center".
3. Find the blocks allocated for the control of the sensor.
4. Set the value to "Disable" in the relevant sections.

Standard Solution

How to disable the touch screen on a laptop? The last trick is suitable for all laptops.

The instructions for disabling the sensor in Windows look like this:

1. Open "Device Manager" in any known way.
2. Expand the "Mice and more..." tab.
3. Find the touchpad/touchscreen.
4. Right-click on the corresponding menu item and select the "Disable" command.

The touch screen on Windows 10 is an auxiliary program for printing text on gadgets that are equipped with a touchscreen. This application is called TabTip.exe. Often, it is used on devices such as tablets or smartphones. However, its use is also relevant on the PC. It can only be controlled with a computer mouse.

How to enable the touch screen in Windows 10

There are several ways to launch this program. The most convenient of them involves the following actions:

• On the free space of the desktop, you need to right-click and select the "Show touch keyboard button" column.

• Then an icon in the form of a keyboard will be displayed in the taskbar. Clicking on this icon will launch the required utility.

The TabTip utility can be launched using the search string:

• Click on the magnifying glass icon and enter the name of the required application.

• In the window that opens, select the application and left-click on it. When you right-click, you will be offered options to launch it.

You can also open the virtual keyboard through the directory. You should go this way: "Program Files" - "Common Files" - "Microsoft shared" - "Ink" - "TabTip".

How to disable the touch screen in Windows 10

You need to go to the Start menu and go to Settings. Here you need to take the list Accessibility and in the window that appears in the keyboard section you should move the slider to the position you need.

You can also enable and then disable this feature on the lock screen. Here in the lower right corner there is an accessibility icon. From the list, you must select the touch keyboard and it will start along with the login.

In addition to opening, you can find a lot of settings in the program that will allow you to choose the most optimal parameters for comfortable use of the on-screen keyboard. It does not take up much space on the monitor screen. In addition, it can be placed in any part of it.

All of the listed options for launching the Touch Screen app are easy to use and take a little time. Such a program on a PC with Windows 10 installed can help out if there is a malfunction or lack of a standard keyboard. In addition, it is convenient to work with it when entering a small number of characters. For example, it is great for printing short messages in correspondence.