How to make a folding metal fishing chair with your own hands. How to make a folding chair with your own hands? Make your own folding plastic fishing chairs

Every avid fisherman should have one on which he will sit by the pond and catch fish. The presence of such a piece of furniture will make fishing more comfortable and enjoyable.

Some people think that you can do without a fishing chair. But if you plan to fish for a long time, then you cannot do without it. Moreover, it is not at all necessary to purchase a ready-made chair in a store. It is quite easy and simple to make with your own hands from available materials.

As for the design features, fishing chairs are:

Whatever option you choose, the fishing chair should look like this:

• durable;
• sustainable;
• small in weight;
• compact and mobile;
• easy to manufacture;
• convenient to use.

But it is worth noting that folding models are considered the most popular among fishermen. They do not take up much space and are easy to carry from place to place. Most often, such products are made from wooden slats, metal pipes and plastic parts.

Attention: When making a chair, you should take into account your own weight and height.

Material selection

You can make a fishing chair from any materials. The most popular are:

Drawing

Before making a fishing chair, it is better to make a drawing of it. This will make it more convenient for you to cut materials and assemble the structure into a single whole. What is a drawing? This is an image of the future piece of furniture in three different projections: front, side and top. On this drawing it is necessary to indicate the number of parts, their exact dimensions and options for attaching individual elements to each other. The optimal sizes of a chair for fishing are:

• width from 270 to 500 mm;
• height from 270 to 470 mm.

Almost any fishing chair will consist of the following elements:

• two legs;
• backrests with legs;
• seats;
• bolts

Some models are equipped with armrests, footrests and other accessories. But these are already more complex and expensive to manufacture fishing chairs.

Reference: A competent drawing will allow you to calculate how much consumable material will be useful in the process of making a chair.

Tools

In the process of manufacturing and assembling a wooden fishing chair, you will need the following tools:

Materials that will be useful:

• lumber;
• bolts and nuts;
• paints and varnishes;
• tassels.

How to make a folding fishing boat out of wood?

Let's look at making the simplest design of a wooden fishing chair with 4 supports. To do this, we will need several wooden beams with a square section of 35 - 40 cm, from which the legs of the product will be made. The process of making a high chair will look like this::

In order for the chair to last as long as possible, it should be treated with antiseptics and coated with water-repellent varnish in two layers.

Attention: In order for a folding fishing chair to easily fold and unfold, it is necessary to correctly adjust the tension of the bolts.

Simple fishing design made from PVC plastic pipes

This version of the high chair can be assembled in a matter of hours according to the following scheme:

Photo

As a result, you will receive a product similar to the following photos:

Useful video

A detailed description of how to make a chair from wood is presented in the video:

An example of making a chair from PVC pipes is shown in the following video:

Conclusion

In conclusion, it is worth noting, no matter what option you choose, a fishing chair assembled by yourself will delight you not only with your own savings, but also with its practicality, convenience and attractive appearance. Each individual stool design is convenient in its own way and it will satisfy all the needs of its owners.

In contact with

Any person who has spent a long time winter fishing inevitably begins to think about how to create at least minimal comfort for himself. After all, the important difference between winter fishing is precisely that the fisherman does not need to get up from his seat either when fishing for fish or when changing the bait on the hook.

If you have the right equipment, the only thing left for an ice fisherman to do is set up his workplace well. All elements of equipment used for fishing should be located literally at arm's length from a seated person. This will save him from having to get up often, exposing himself to the cold wind and being distracted from the process of fishing.

The main element of the arrangement is the feeder chair. After all, winter fishing is mainly a passive activity - a person has to sit in one position for a long time. At the same time, the load on the back increases, especially on its lumbar region.

Industrial options for feeder fishing chairs

Important accessories for feeder fishing should be at hand: a bucket with bags of dry and home-prepared bait, a box with bait.Not all fishermen are willing to lay out their catch right on the ice at their feet.

Some people, having removed the fish from the hook, immediately put it in a small plastic container or bag. To do this, the container must also be placed near the seat itself, so that the necessary manipulations with the catch can be performed without getting up.

A seat with a folding attachment table and a body kit necessary for winter fishing makes any handling of fish, hook and bait convenient, minimizes time and effort for all auxiliary procedures, making it possible to concentrate only on the main thing - fishing. Even if something suddenly appears in the fisherman’s field of vision, he will not ignore it, while continuing to fish.

A more reliable option for storing individual accessories is in special pockets made in the seat upholstery. This is guaranteed to prevent a sudden gust of wind from blowing away the bait or bait.

In addition, putting all the necessary accessories into the seat pockets and removing all the necessary accessories from there is much more convenient than constantly bending low when everything is laid out on the ice. You can choose any other design of niches and pockets for accessories in the chair, taking into account your individual priorities.

Characteristics of the chair

The features of any element of a winter fisherman's equipment are akin to a traveler's equipment - in size it must be designed to be carried in a backpack or suitcase, quickly disassembled and folded, lightweight, and easy to use.

It would not be at all superfluous if its covering at least partially protects the rider from the cold winter wind - not every fisherman pitches a tent over the hole.

The feeder fisherman's chair should:

• be stable on ice;
• sit securely even on uneven surfaces;
• Additionally, have support for the back, since it is this part of the body that becomes numb when sitting for a long time over the hole in a monotonous position.

If the backrest reclines, the upper body support allows the person to assume a comfortable waddle position. A backrest-supported seat will certainly provide the fisherman with the opportunity to get the pleasure for which he leaves the cozy house in winter in any weather. It wouldn’t be out of place to mention your health, which, while fishing without minimal amenities, can cause damage, albeit small.

DIY feeder chair. Part 1

Having seen it one day at a neighbor's place on the ice, an ice fishing enthusiast becomes eager to have his own comfortable feeder chair. But the cost of even the simplest seats for winter fishing in ruble terms is now so substantial (from 7,000 rubles without body kit!) that if a person does not have a significant amount of free money, it is impossible to justify the purchase by any catches or desire for convenience.

Tools in your hands

It is quite possible to get a comfortable and reliable seat for feeder fishing without breaking another hole in the family budget - you can make it yourself at home. To perform this work, no special skills of a locksmith or a master of sewing on a sewing machine are required.

Everything can be done by a person with average abilities to design and make something; all he needs to do is be determined and stubborn.

After the design of the feeder chair has been thought out, the necessary sketches and outlines have been made, it is necessary to calculate the amount of materials.

If the dimensions of the product are approximately one and a half meters in height and half a meter in width, then you will need materials that can partly be bought in a store, and partly found at home.

It is difficult to choose a more suitable material for the frame of a future chair than a profile pipe. The main advantages of this material:

• cheapness;
• high strength;
• weldability;
• ease of machining.

Necessary materials

Materials from which most homemade feeder chairs of simple designs are made:

• pieces of plywood 8 mm thick;
• steel pipes with a diameter of 20-25 mm with walls whose thickness is not less than 1.5 mm, cutting elements from these pipes for one chair will be: 55 cm - 4 pieces, 70 cm - 2 pieces, 30 cm - 1 piece;
• pieces of fabric with foam padding for covering the seat and back: 800×400 mm - 1 piece; 700×400 mm - 1 piece;
• bolts with nuts and wings of various lengths for assembling legs, seat and back;
• furniture bolts for connecting the seat to the back;
• steel plate for thrust bearings 3 mm thick;
• staples for a construction stapler 6 mm;
• primer and dye for processing the chair frame - in the minimum amount available on the sales counter.

For the feeder, the size of the seat-chair of the universal version is almost the same - 1.5 × 0.5 m. The given quantities and sizes of elements are based on a simple version without side armrests and an additional shelf for the legs.

If the craftsman considers these elements of the chair to be useful, then he will additionally need the materials of the listed nomenclature, but in a different quantity. Drawings of do-it-yourself corrugated pipe seats can be found in abundance on fishing equipment websites.

Foldable design

One of the most successful designs is a feeder chair with insulated foam upholstery. To stick foam rubber onto plywood, you will need titanium glue, and it is more convenient to prime and paint the finished frame using spray cans. It is better to choose a matte black paint color.

An important detail is that the chair for winter fishing must be foldable, since it will constantly have to be transported, carried, moved every time you go fishing.

It is permissible to make all frame elements from a round aluminum pipe of sufficient strength, in which case the chair will be much lighter. But welding aluminum at home is problematic.

Popular search queries for video clips on the Internet are: “Do-it-yourself feeder chair”, “Make your own feeder chair”, “Chair for a winter feeder”.

DIY feeder chair. Part 2

Even when the chair is ready, it is comfortable and the fisherman has sat in it enough at home, it is too early to take it fishing. For greater convenience, you need a specific kit for winter fishing.

These are additional accessories to the seat in the form of pockets for bait and bait, stands for the rod, a folding table for a thermos with tea and manipulations with the feeder and hooks. Only when everything is complete will the chair begin to “work off” the costs of its construction.

DIY body kit

Prices for feeder chair body kit elements on sale are steep.Buying the entire body kit as a set will be no cheaper than the chair itself.

Types of body kit include:

• rod stands;
• folding table with drawers for baits and groundbaits;
• special hanging bucket for bait mixture;
• pocket for thermos.

All these elements are not so complex that a person who made a chair with his own hands would buy them in a store. With such equipment, the fishing process is simplified.

Become a mechanic

Seeing the cost of branded body kit elements, the fisherman will only strengthen his desire to continue his plumbing activities. To make your own fishing seat kit, you will need the following materials:

• aluminum tube F 25 mm long 300 cm;
• fitting elements with which plastic pipes will be attached to the frame of the chair - 6 pcs.;
• pen for drilling plastic and wood F 26 mm;
• fastening elements for pipe blanks;
• drive-in nuts for furniture fittings may be useful;
• M8 threaded bolts;
• lightweight but durable plastic box;
• plastic clips for fixing pipe blanks.

The materials listed in the list do not cost a lot of money, especially since in many homes where furniture or plumbing is often repaired, they may be in abundance. From here the spare parts of the chair are then formed in case of breakdown.

We manufacture the body kit in the following order:

1. We drill out the inner diameter of the tees to the diagonal size of the corrugated pipes of the chair legs.
2. In the body of each tee, using a soldering iron, we fix a nut into which the M8 fastening bolt will be screwed.
3. We drill holes in the legs. into which the mounting bolts will fit freely.
4. We install tees and fasten them to the pipes with bolts.
5. For each type of armchair body kit we make our own frame, which will allow you to install it on the side of the legs.
6. We attach the bait box to the legs with clips that securely compress the corrugated pipe.

Attaching body kit elements to the feeder chair

To make a mount for fishing rods, it is enough to make a side branch from any chair leg. We also make a suspension for the bucket of food - we drill holes in the bucket for the clips and securely fix it.

Additional accessories

In addition to a luxurious chair with the necessary body kit, an ice fisherman will need various additional equipment. The main ones can be listed:

• drill for drilling holes;
• a sieve for scooping out ice crumbs from the holes;
• grip for large fish.

In different conditions of each specific fishing, the set of additional devices is different, and only the fisherman knows what he will need that day on a given body of water. It is convenient to transport all devices in a special box, which is convenient to carry along with the chair and gear.

Do-it-yourself bait table for feeder fishing

You need to take special care of the bait table, because it can not only make fishing easier, but also be very useful when relaxing outdoors. You can place bait, accessories, flavors, bait, and other equipment on it.

When all this is at hand, auxiliary time is reduced, fishing opportunities and efficiency increase. It does not necessarily have to be easily and quickly attached to the feeder chair; a separate attachment table is quite suitable on ice.

Types of homemade bait tables for feeder fishing:

• according to frame material: metal or PVC;
• according to the material of the tabletop: plastic or laminated plywood;
• according to design features: non-separable tables or a table with removable legs.

It is better to take a pipe and use it to make a frame for attaching the tray. The tray is attached to the frame with self-tapping screws, and the legs of the required length are welded or soldered.

A shelf table is more suitable for a feeder. If each tray is mounted on its own frame with short legs, then it will be possible to place the sections one on top of the other and in this way build a table of the required size and capacity.

A convenient plastic table with leg extensions, made from plumbing pipe elements, is convenient. In addition to being light and easy to transport, such a feeding table is easy to clean from frozen food residues, wash, and store on a shelf in the home utility room. But the table can also be folding, with one tray.

Each fisherman has a chair on which he sits near a pond and catches fish, and also admires nature when there is no bite. You can do without a chair, but it won’t be the same fishing. Fishing is, first of all, recreation, as a result of which a person accumulates energy for the future. If you fish on a chair, you can easily last a whole day. If you spend the whole day fishing on your feet, then a person gets tired quickly. Of course, if you take spinners, then they don’t need a chair, since they move around a lot throughout the entire fishing period, in search of predatory fish. For lovers of classic fishing, using a regular fishing rod or feeder, a chair is a must.

You can buy it in a store or make it yourself, especially since it is not at all difficult. This is exactly what this article is about.

There are many options for making your own fishing chair. As a rule, most fishermen opt for a simple model that has minimal weight and takes up a minimum of free space. Many people believe that a chair is necessary to facilitate the fishing process, making it more comfortable. A higher level of comfort requires a more serious design, which is unlikely to be light and will take up a lot of space. In some cases, this is not of fundamental importance if there is something to transport fishing gear and other accessories.

The following designs may be most useful for fishing:

Many anglers take similar structures with them if fishing is planned for a long period. Everyone knows that fish bite is not regular and it takes breaks, especially during the day. When there is no bite, you can lie down, only occasionally looking at the bite indicator. If you install an electronic indicator, you will never miss the moment of a bite. Naturally, a lounge chair is not a simple design, it is not light, and it takes up a lot of space during transportation.

This is quite a useful thing, because it allows you to relax your back, which is important, especially for older anglers. The armchair chair can be used in other cases. These models are taken with them when they go fishing for several days, for example, on a weekend.

This design has a number of advantages compared to other models, since you can not only sit on it, but also store fishing equipment, as well as caught fish. The box chair is not in particular demand among summer fishing enthusiasts, but winter fishing enthusiasts appreciate the advantages of this model. Most winter fishing enthusiasts have such a box chair in their arsenal, since it is an irreplaceable thing.

Naturally, such a chair does not have the necessary level of comfort, but it has a number of advantages. Firstly, it is lightweight as it is made from lightweight materials. Secondly, it takes up little space and can be transported even on a bicycle, which cannot be said about other designs. There are claims that sitting on such a chair is as comfortable as sitting on the ground or on a stump. Firstly, it is unlikely that you will be able to find a stump of the required height in the place where you are fishing, and secondly, sitting on the ground near a reservoir may not pass without a trace, especially since you have to sit for a long time. In addition, such a folding chair is not difficult to make yourself. Moreover, it will take a little money and time.

Quality and structure of the fishing chair

The quality of a fishing chair depends on many factors, including its design. In the manufacture of such accessories, lightweight materials are used that are not very durable. Other materials, although durable, have a significant weight. In addition, manufacturing requires a special tool.

As a rule, the design of a fishing chair comes down to the fact that the structure is transformed from a working position to a transport one. This approach allows you to reduce the usable space occupied by the product. Since it contains moving elements, the reliability of the structure is significantly reduced. Therefore, the design should be simple and have a minimum of moving joints.

Before you start making a fishing chair, you should carefully calculate everything, and most importantly, decide on its structure. In addition, you must have basic skills in working with various materials and tools.

• Folding chair, as a rule, consists of 2 planes connected by hinges, as well as a device that regulates the angle of the backrest. Basically, the seat and backrest are made in the form of a frame, made of light metal, on which fabric is stretched, according to the principle of the well-known folding bed. By the way, if you try, you can make a fishing chair from an old folding bed at a minimum cost.
• . The simplest design consists of a cabinet of a certain height (about 40 cm), on top of which a soft seat is mounted. It also serves as the top cover of the cabinet and has the ability to open. Fishing accessories and fish are stored inside the cabinet.

• Chair with back and armrests. It can be made either folding or solid, but a minibus is needed to transport it, since it will not fit in a regular car. The one-piece version is highly reliable, but you have to pay for it with useful space. The most suitable option is a folding chair. To make such a chair you will have to work hard. For the manufacture of such a structure, lightweight materials should also be used, but with acceptable strength.
• . The most complex design, the manufacture of which will require a lot of personal time and money. In this case, you will also have to give preference to the folding option. In any case, this is the most suitable option. Its operating principle is similar to a folding chair. It can also be made from 2 folding parts. The only difference is that the parts are made, for example, from plywood and upholstered with soft material. Therefore, this design may take up more space, but it is somewhat more reliable.

The main materials for making a fishing chair are wood, plywood and chipboard. The use of metal is limited by the availability of special tools. Firstly, you will need a welding machine, which not everyone can handle. Many people argue that aluminum is not suitable because it is too soft. This statement is wrong. Many people still remember the Soviet folding bed, on which many people relaxed at home or in the country. Its frame is made of aluminum. Despite this, the folding bed served for years. Therefore, anyone who has the opportunity to use an aluminum or duralumin pipe with a diameter of about 2 centimeters can safely use it. At the same time, the result will be a lightweight and mobile structure, which is also resistant to atmospheric conditions. As for other materials, they will have to be protected from moisture.

You will also need durable fabric or artificial leather for upholstery. For moving joints you will have to stock up on bolts, washers and nuts, and possibly other parts. It all depends on personal preferences, as well as the nature of the design.

It's time to move from description to practice in making the 3 types of chairs described above.

General approaches

All types of chairs, regardless of design, consist of similar components. Therefore, some manufacturing stages will be similar.

First of all, what needs to be done is to decide on the design of the future chair and create a drawing of it, according to the drawn sketch. In this case, the drawing must indicate its main dimensions, as well as the dimensions of the component parts, separately.

All the main parts must be listed and a list is made based on them. For example:

• Legs - 2 pcs.
• Back with legs.
• High chair.
• 4 bolts, etc.

If you look at the drawing, you can determine the complete availability of all the materials that are necessary for the manufacture of the structure.

Everyone went to school and remembers their descriptive geometry lessons very well. Therefore, there should not be any special problems in drawing such a simple drawing. If something doesn’t work out, you can not draw a real drawing, but limit yourself to ordinary drawings of parts by hand, indicating their real dimensions.

A drawing or drawing involves drawing the product from three sides - front, side and top. Side and top views are called projections. The main image is considered to be the front view, while the side view is located to the right of the main image, and the top view is located below the main image. At the same time, the side view and top view should not extend beyond the dimensions of the front view. This can be considered a perfectly executed drawing.

At the same time, it should be noted that the time of graph paper and Whatman paper is gone. Nowadays, they have been replaced by computers with special programs installed on them to automate the design process, including the stage of creating working drawings. Unfortunately, learning how to create drawings on a computer requires experience. Therefore, you shouldn’t bother with such a simple design, since you can get by with a regular hand drawing.

Calculations

In order not to get confused in the drawings, it is necessary to indicate the actual dimensions of all parts.

After all the dimensions have been determined and all the materials have been prepared, you can proceed to the main stage - putting the idea into practice. To do this, you need to go to a workshop, which can be a balcony, barn or garage, where all the tools and materials are stored.

To make it, you need to take a couple of wooden beams and drill one hole in the center in each of them. After this, the beams are connected in an “X” shape using bolts.

The same is done with another pair of bars. Finally, the two X's are joined together and the chair is then upholstered in faux leather. To make it last a long time, it should be coated with two layers of water-repellent varnish. That's it, the chair is ready for use. But this will not be a folding chair, which will not take up very much useful space. Folding chairs are made using the same scheme, but it is better to use metal.

There are chairs of this type. Unfortunately, they are used very rarely, since this design is not very stable.

Making such a chair can take up much more useful time and require more effort.

Manufacturing technology:

First of all, the backrest with legs is assembled, and then the second pair of legs along with the seat. Before assembly, you need to check that all dimensions match, after which you can start drilling holes for connections. The legs are connected in the same way as in the first case, with the letter “X”. Bolts are used for connection. The holes for the bolts should be drilled to a slightly larger diameter so that they fit freely. The seat is connected to the front. The seat is not attached rigidly to the backrest, but on hinges to create a folding structure. If desired, armrests can be attached to the seat. At the same time, you need to take into account that the design is folding and the armrests can get in the way.

As mentioned above, a box chair consists of a cabinet with an opening top that serves as a seat. This design is made from lightweight materials such as plywood or aluminum. The upper part of the cabinet is covered with artificial leather using foam rubber. The foam is laid first, and then it is covered with artificial upholstery. It not only makes the chair soft, but also makes the sitting warm. This is especially true in winter.

The manufacture of such a structure will require real engineering knowledge, since the product is characterized by the presence of a large number of connections, including moving elements.

The chair turns into a lounger (bed) due to a special mechanism. To implement such an idea, it is necessary to move the centers of the holes in the scissors closer to the edge, after which special grooves are cut out. A special frame is then made and bolted to the backrest. After this, they begin to make the seat. It can be made either solid from wood or from fabric.

Many fishermen practice making various accessories with their own hands. Firstly, it is interesting, and secondly, this approach allows you to save significant money. If you buy a chair for a fisherman, even the simplest one, you will have to part with a certain amount of money, and a considerable one.

But if you have extra funds, and do not have the desire or skills to make at least a basic product with your own hands, then you can go to a fishing store and buy any chair you like. As a rule, the store always has a wide range of similar products that can satisfy any category of consumer. Here you can buy both a simple folding chair and an armchair with armrests: if only you had the money.

Obviously, you can come up with a huge number of different variations of one chair, but to understand, you should consider the main types of furniture for fishing:

• Sun lounger. It's no secret that while fishing you get tired of sitting and want to lie down for a while, since sitting for a long time without a backrest is a big burden.

Important! There is a prejudice among inexperienced fishermen that the necessary efforts can only be made while standing. In fact, it is necessary to stand only if you are going for catfish or pike - to catch the same crucian carp, you can fish while lying down.

• Folding beds consist of two planes, which are connected by two hinges and are equipped with a fabric seat. For this reason, these types of chairs are the easiest to assemble.

Important! You can make it entirely out of wood, but it requires a little more effort.

• Drawer with pull-out elements. It is something similar to a home cabinet, from which you can pull out a shelf. There is only one difference between these pieces of furniture - a backrest will be attached to the top of the fishing chair.

Important! A variety of materials can be used. Wood, leather, fabric and other materials are suitable for our business.

You can also easily make a homemade body kit for the feeder chair. To do this, you will need plastic plumbing fittings, pipe fasteners, and the aluminum pipes themselves.

First way

A three-legged chair is less stable. However, its manufacture will require fewer materials:

• three wood screws;
• one bolt with a swivel loop (with washer and nut);
• 3 wooden pins (each length is 60 cm, diameter 4 cm);
• seat fabric (leather);
• one standard bolt (with washer and nut);
• three separate washers.

Tools:

• drill or screwdriver;
• two drills (one 6 mm, the second 1 mm).

There are many options for making your own fishing chair. As a rule, most fishermen opt for a simple model that has minimal weight and takes up a minimum of free space.

Many people believe that a chair is necessary to facilitate the fishing process, making it more comfortable. A higher level of comfort requires a more serious design, which is unlikely to be light and will take up a lot of space.

In some cases, this is not of fundamental importance if there is something to transport fishing gear and other accessories.
.

Chair-lounger

It's time to move from description to practice in making the 3 types of chairs described above.

General approaches

All types of chairs, regardless of design, consist of similar components. Therefore, some manufacturing stages will be similar.

First of all, what needs to be done is to decide on the design of the future chair and create a drawing of it, according to the drawn sketch. In this case, the drawing must indicate its main dimensions, as well as the dimensions of the component parts, separately.

All the main parts must be listed and a list is made based on them. For example:

• Legs - 2 pcs.
• Back with legs.
• High chair.
• 4 bolts, etc.

If you look at the drawing, you can determine the complete availability of all the materials that are necessary for the manufacture of the structure.

Drawing a drawing

Everyone went to school and remembers their descriptive geometry lessons very well. Therefore, there should not be any special problems in drawing such a simple drawing. If something doesn’t work out, you can not draw a real drawing, but limit yourself to ordinary drawings of parts by hand, indicating their real dimensions.

A drawing or drawing involves drawing the product from three sides - front, side and top. Side and top views are called projections.

The main image is considered to be the front view, while the side view is located to the right of the main image, and the top view is located below the main image. At the same time, the side view and top view should not extend beyond the dimensions of the front view.

At the same time, it should be noted that the time of graph paper and Whatman paper is gone. Nowadays, they have been replaced by computers with special programs installed on them to automate the design process, including the stage of creating working drawings.

Unfortunately, learning how to create drawings on a computer requires experience. Therefore, you shouldn’t bother with such a simple design, since you can get by with a regular hand drawing.

Calculations

In order not to get confused in the drawings, it is necessary to indicate the actual dimensions of all parts.

After all the dimensions have been determined and all the materials have been prepared, you can proceed to the main stage - putting the idea into practice. To do this, you need to go to a workshop, which can be a balcony, barn or garage, where all the tools and materials are stored.

Folding fishing chair on four legs

To make it, you need to take a couple of wooden beams and drill one hole in the center in each of them. After this, the beams are connected in an “X” shape using bolts.

The same is done with another pair of bars. Finally, the two X's are joined together and the chair is then upholstered in faux leather.

To make it last a long time, it should be coated with two layers of water-repellent varnish. That's it, the chair is ready for use.

But this will not be a folding chair, which will not take up very much useful space. Folding chairs are made using the same scheme, but it is better to use metal.

Fishing chair on three legs

There are chairs of this type. Unfortunately, they are used very rarely, since this design is not very stable.

Armchair with backrest

Making such a chair can take up much more useful time and require more effort.

In general, you can come up with countless different options for chairs, these can be chair-like seats with a back, poufs, drawers, lounge chairs, and so on.

Let's look at the main types of fishing chairs that can be most useful.

If you've ever assembled a cabinet with pull-out shelves, then you already know how to assemble this chair. As mentioned above, the only difference is that you will also need to upholster the upper part with something soft, so as not to sit through everything in the world.

You can assemble various models with your own hands using various materials. But their main characteristics remain unchanged. Among the qualities that chairs must have are the following:

• Sustainability. The chair must be stable regardless of the topography of the coastal strip.

• Strength. The design must support the weight of the fisherman, and not break after the first use.

• Small size and weight. Stowing a bulky and heavy chair even in a personal car can be problematic. And in those cases when you need to walk a certain distance, any person seeks to lighten his burden. And a heavy or large chair is unacceptable in such a situation.

Since it is planned to assemble a fishing chair with your own hands, its design should be simple. Therefore, it is better to give preference to simple schemes, which everyone can assemble.

Quality and structure of the fishing chair

• A folding chair, as a rule, consists of 2 planes connected by hinges, as well as a device that regulates the angle of the backrest. Basically, the seat and backrest are made in the form of a frame, made of light metal, on which fabric is stretched, according to the principle of the well-known folding bed. By the way, if you try, you can make a fishing chair from an old folding bed at a minimum cost.
• Box chair. The simplest design consists of a cabinet of a certain height (about 40 cm), on top of which a soft seat is mounted. It also serves as the top cover of the cabinet and has the ability to open. Fishing accessories and fish are stored inside the cabinet.

Take two wooden beams, drill holes in them in the center, and connect them with a bolt so that you get some kind of wooden scissors. Then do the same with the other two legs. After this, connect these two pairs of “scissors” together as shown in the figure.

The difference here is that the seat is attached to only one side and slides along the other.

There is another version of such a chair - a tripod chair. This is a more exotic option, in which the seat resembles a saddle from a motorcycle or bicycle.

However, such a chair is uncomfortable and fragile, so it is mainly liked by young people.

Design options

A DIY chair that has a drawer for everything you need is quite comfortable. In appearance, it resembles an ordinary cabinet with shelves inside, but its top is the seat itself.

It is advisable to cover it with soft material so that the gluteal muscles do not become numb from being in one position for a long time. The box can store bait, a thermos, and warm clothes.

Such storage can be especially useful for winter fishing. It is warmer to sit on it than on a regular stool, because the box itself will protect you from the cold coming from the ground.

Of course, such a design is not very convenient to carry in your hands, but the box for fishing equipment can be transported in a car.

Another interesting option is a “two in one” chair-backpack for effective fishing. An interesting and practical invention, as it allows you to carry a backpack and a chair on your back at the same time.

Making such a design is not at all difficult. To do this, you just need to make backless folding fishing chairs from two aluminum rectangular contours, as described at the beginning of the article.

You should attach a backpack to the arches. When the chair is folded, it is convenient to carry it yourself along with your bag.

How to make such a fishing seat with your own hands? If you're happy with a simple design, here's how to make one:

1. Decide on the sizes that are right for you.
2. Make the corresponding drawings.
3. Take two closed rectangular metal pipes.
4. Connect them crosswise with a bolt and nut.
5. Sew a seat from a wide double strip of tarpaulin on top.
6. Make a limiter at the bottom from a thin double strip of fabric.
7. Attach another one to one of the arcs, which will act as a backrest.

This is the easiest option for making a folding bed. Although it is important to take into account that its back when unfolded will be in one position.

Before deciding how to make a fishing chair with your own hands, you need to decide what kind it should be.

The simplest option is a stool. These are the lightest and most compact models that are easy to carry. And their manufacturing technology is simpler than other options.

A fishing chair with a back will be more comfortable. Assembling it with your own hands is a little more difficult than the previous version. However, it will allow you to relax your back during prolonged sitting, which is also important for any fisherman.

Selecting materials

Well, now you can imagine how to make a fishing chair with your own hands, because it is not particularly difficult. The most important thing is to avoid mistakes in the first two stages. Happy fishing!

The main materials for making a fishing chair are wood, plywood and chipboard. The use of metal is limited by the availability of special tools.

Firstly, you will need a welding machine, which not everyone can handle. Many people argue that aluminum is not suitable because it is too soft.

This statement is wrong. Many people still remember the Soviet folding bed, on which many people relaxed at home or in the country.

Its frame is made of aluminum. Despite this, the folding bed served for years.

Therefore, anyone who has the opportunity to use an aluminum or duralumin pipe with a diameter of about 2 centimeters can safely use it. At the same time, the result will be a lightweight and mobile structure, which is also resistant to atmospheric conditions.

As for other materials, they will have to be protected from moisture.
.

You will also need durable fabric or artificial leather for upholstery. For moving joints you will have to stock up on bolts, washers and nuts, and possibly other parts. It all depends on personal preferences, as well as the nature of the design.

As a rule, wood and chipboard are the most popular, since making anything from metal requires a welding machine and good tools for carving steel, and not everyone has them.

Why steel - because this is the ideal option - it is strong, durable, and if you cover it with stainless varnish, then it won’t even need water.

Aluminum will bend after the first fishing, and will continue to wrinkle from any push or blow. From this point of view, wood is optimal because it is easy to obtain and easy to work with.

To connect the moving parts, we will need steel bolts, nuts and studs, possibly pins, but this is at our discretion. You will also need fabric or artificial leather to make the chair soft.

You can assemble a chair for fishing with your own hands using various materials. The use of available raw materials will significantly reduce the cost of all work.

You can often find wooden chairs. Wooden blocks of various sizes are used both for the manufacture of the frame and for the preparation of the seat, backrest and other elements.

Metal pipes are widely used as supports. They can be combined with wooden or fabric seats. Pieces of tarpaulin, leather and other durable fabrics are used to cut out the seat. There are also plastic items. This is a durable yet lightweight material, ideal for making fishing chairs.

The structures are assembled with your own hands using fasteners. The base is assembled, as a rule, using self-tapping screws, bolts, screws, and staples.

Manufacturing algorithm

It is very easy to make a stool if you follow the diagram below:

1. Cut the plastic pipe into 8 pieces. 4 of them should be 50 cm long, and the remaining 4 should be 35 cm long.
2. Cut two pieces from a piece of tarpaulin. One will serve as a seat, the other as a jumper to stabilize the stool. Determine the width and length of the material yourself based on your needs.
3. Take the long tubes and connect them in twos crosswise with bolts.
4. At the top and bottom, use plastic corners to attach the long pieces of pipe to the short ones. The frame of the folding stool for summer fishing is ready.
5. Take a piece of tarpaulin folded in half and cover the top of the structure, which will serve as a seat.
6. Also fold a thin strip of fabric in half and sew it to the lower supports so that it serves as a limiter.
7. Adjust the tension of the bolts so that the chair folds and unfolds easily.

A stool made in this way is easy to take with you outdoors. Well, if you want to make a chair-chair for comfortable fishing, then attach a metal frame to the legs. By the way, such frames can also be used instead of pipes. Homemade chair with back

And here is a diagram showing how wooden folding comfortable chairs for fishing are made. To make it, you will need 4 square wooden blocks 35-40 cm long. These are the legs of the chair. The seat will consist of two 30 cm bars. You will also need slats for attaching the seat and legs.

To make a fishing chair, you will need drawings. It is also important to prepare the parts and only then proceed with assembly.

The bars are fastened crosswise with bolts and nuts. To do this, you must first drill holes in the right places.

One pair of legs is fastened together with a crossbar for strength. After the frame is assembled, it is checked for stability and, if necessary, the excess length of the legs is cut off.

A folding chair for feeder fishing must be painted or varnished. You can learn more about the process from the video.

A comfortable fishing chair is, so to speak, a fisherman’s “workplace.” This means it should be comfortable.

Such a seat must have the following characteristics:

• light weight;
• compactness;
• sustainability;
• Possibility of adjusting the back and legs.

Thus, the main requirement is convenience and safety of use. To catch a big trophy, you often have to wait a long time.

Of course, doing this in a chair is much more convenient than standing. The same can be said about tying leashes, attaching feeders and fishing for the catch.

If the legs and back are adjustable, this will allow you to take a comfortable position and relieve your back. If you are going fishing on foot, the chair should be lightweight and equipped with a wide shoulder strap.

Nautilus Simple NC 9002. A compact and lightweight chair that is perfect for both fishing enthusiasts and those who relax in nature.

Advantages:

• the seat is perfectly taut;
• does not sag anywhere;
• holds the body well;
• soft filler is evenly distributed over the entire area;
• The wide back provides excellent back support.

The only negative is that only one position is available. The angle of inclination cannot be changed.

Characteristics:

• The upholstery is made of durable and wear-resistant material.
• Another advantage is easy cleaning, which is important for furniture that is used outdoors.
• The frame is good old steel (strong and very reliable).
• The build quality is excellent. It feels like a glove, nothing wobbles anywhere.
• Powder painting.
• The legs are height adjustable. Therefore, the product can be installed on uneven surfaces. The legs are made of aluminum to avoid corrosion.

When folded, it takes up very little space in the car. And the relatively light weight of 4.2 kg will allow you to easily carry it across a pond.

Price 4300 rubles.

FK-5 Carp Cuzo. The design is foldable. It is very convenient for carrying and transporting to a place of recreation or fishing. At the same time, the weight is about 8.5 kg. When carrying, the weight is not felt much.

Peculiarities:

• Structurally, it has a reinforced metal base. The maximum permissible load is up to 150 kg.
• The product unfolds and installs very quickly, which will also be a definite advantage during its operation. Speed ​​to the surface is achieved due to folding legs. There is no possibility of fixing the legs on the product itself, but this is not important.

Characteristics:

width 55 cm, depth 55 cm.

Now let's move from theory directly to practice - consider the procedure for making the four types of chairs described above.

This option is a little more difficult to make, but here's what it looks like

Self-assembled folding fishing chairs in the shape of a stool are very convenient to use. The base in them is made of plastic pipes. A piece of dense, durable fabric is used as a seat.

The first step is to prepare the blanks. 8 parts are cut from a plastic pipe. The pieces that will serve as a support should be about 50-60 cm in length. You will need 4 pieces of such blanks. Another 4 pieces will be required, 35-40 cm long. Two of them will go to the lower jumpers between the legs. They will allow you to obtain a more reliable and stable structure. And two will organize the seat.

Long pieces are connected in pairs. Each pair is fastened with a bolt twisted in the middle. You should get two cross-shaped parts. They are connected to each other at the edges by short elements. It should be a sliding structure. The ease of folding (unfolding) is regulated by the tension of the bolts.

The upper short jumpers are connected to each other with a piece of fabric (for example, tarpaulin). It should be a seat. A narrower strip of fabric is stretched between the lower pair of jumpers. It will act as a limiter that will prevent the chair from folding.

You can also make your own folding fishing chairs with metal legs. Their design is similar to the previous version. The only difference is the use of aluminum (or steel) pipes. It is worth noting that this option will have more weight than one made from a plastic pipe. But at the same time, its reliability will be higher.

The manufacturing process itself is similar. Blanks can be taken in the same sizes. The only difference is the way the individual elements are attached to each other. Metal will be a little more difficult to work with. If you have the tools, most connections can be made welded. Only at the intersection of the legs must there be bolts. Otherwise the chair will not fold.

This is another option that will help you assemble a folding fishing chair with your own hands. Drawings prepared in advance will allow you to determine the dimensions of the structure and the required amount of materials.

4 blanks are prepared from wooden blocks, which will serve as supports. The two parts are connected to each other by a bolt twisted in the middle of the legs. You should end up with two blanks that are somewhat reminiscent of scissors. The blanks are connected to each other using wooden planks. They will serve as a seat. They can be replaced with fabric.

Jumpers are made from below in the form of wooden crossbars. They will prevent the chair from falling apart.

Similar to the previous option, you can make your own folding fishing chair with a backrest. To do this, you will need to slightly change the design. For this you will need the following materials:

• Wooden supports (2 pcs.) 91 cm long.

• Wooden supports (2 pcs.) 55 cm long.

• Six boards of different sizes for the seat (40x7, 39x4, 36.5x4, 36.5x4, 31x4, 30x4).
• Wooden back (40x0.7 cm).

• Crossbars for connecting bars (1 piece measuring 39x5 cm and 2 pieces measuring 32x3 cm).

They begin work by preparing the supports. Holes for bolts are made along their outer part. On the inside, grooves are made along the slats, 1.1 cm long and deep. The supports are connected by crossbars. The joints are coated with glue.

To make it more comfortable to sit on a chair, a bevel is made above the bunch of long supports. The boards on the seat are connected to the bars using dowels and screws.

General rules

All the structures we have presented are somewhat similar to each other, so up to a certain stage the algorithms for their assembly will be the same. So, the first thing to do is to carry out calculations and draw a drawing (professional engineers call this stage design).

Start with a sketch - draw on a piece of paper what your chair should look like. For now, don’t pay attention to the dimensions, structure, design, and so on. Focus only on its external form.

Then select the parts from which it will be made.

List them in a column on a piece of paper, like this:

• Legs - 2 pcs.
• Back with legs
• toilet seat
• 4 bolts

And so on. Afterwards, when you decide what parts your structure will consist of and approximately how many bolts will be needed, mark on the sketch the places where these fasteners should presumably be located (again approximately!), and you can proceed to the drawing.

How to make a drawing?

At school, everyone had lessons in engineering graphics and descriptive geometry, so you most likely know what projections are, and also remember how to draw drawings. If you forgot everything or simply slept through all the lessons, there is nothing difficult here.

A drawing is an image of your product from three sides - front, side and top. These views are called projections. In the drawing, the front view is located in the upper left part, below it is the top view, and to the right of the front view is the side view.

How to catch more fish? I have been active fishing for quite some time and have found many ways to improve the bite. And here are the most effective ones:
Bite activator.

Attracts fish to cold, warm water with the help of pheromones included in the composition and stimulates its appetite. It’s a pity that Rosprirodnadzor wants to ban its sale.

More sensitive gear. Reviews and instructions for other types of gear can be found on the pages of my website.

Lures using pheromones.
You can get the rest of the secrets of successful fishing for free by reading my other materials on the site.

In this case, the front view must be drawn at the same level as the side view and the top view, so the drawing will be much more accurate. This is called axonometric connections.

Now about the technical side of the issue: if you like to tinker with whatman paper, graph paper, pencils and erasers, then for God’s sake, but today the life of engineers has been greatly simplified by computer modeling, and in particular by programs such as AutoCAD and compass. Download them from the Internet and go ahead.

What to do after the drawing? Calculations.

When you have drawn a high-quality, understandable drawing, you can start making calculations. The drawing should be clear so that you don’t get confused in it, because then your chair will turn out crooked, and the work will have to be redone from the beginning.

To cut the necessary parts from the workpiece, you will need to accurately determine their dimensions; a drawing will help us do this. If you drew on paper, then simply measure the lengths of the parts with a ruler, and then increase all the dimensions several times, and you will get the dimensions of a real chair. If you worked on a computer, use the built-in length measurement function.

That's it, the theoretical part ends here, and you go to the workshop to make parts.

Conclusion

As you can see, it’s easy to make a fishing chair with your own hands. Having chosen the model you like, you can begin preparing the drawing. It is used to calculate the required materials and dimensions of the required parts. And then all the elements are connected together.

The choice of model and materials depends on several basic parameters. The main ones can be considered ease of manufacture, convenience and comfort during operation, size and weight.

Their combination depends on personal preferences. If you go fishing by car, you can choose comfort and neglect light weight.

If you prefer to walk, then it is better to choose lighter and more compact models.

Chair-lounger

This option is the most difficult. Because there are more connections and mechanisms here than in the previous ones.

It turns into a bed by moving the shutter along special depressions on the rear legs. To make such a chair, move the centers of the holes in the scissors closer to the edge, after cutting out depressions (grooves) on them.

Next, fabricate the bolt carrier (that's what fits into the slots) and bolt it to the back. That's it, all that remains is to work on the seat.

It doesn’t have to be wooden; you can make it fabric or leather.

Making things yourself is not only cheap, but also enjoyable. However, if you still do not have experience in this matter, then it is better to go to the store and buy one, because if you make a bad chair, it may fall apart right under you, and you risk getting injured, especially if you are already quite old.

If you know someone who knows carpentry, ask them for advice or offer to evaluate your work. Chances are, if the chair has any flaws, they will notice it right away, and you can send the chair back for revision in a timely manner.

Facebook

Twitter

In contact with

Classmates

Google+